Turbo Pumps And Controllers :: Turbo Pumps :: Edwards :: nEXT930D Turbopumps

Edwards Mounting Kit Adapts EPS 800 Power Supply to side of nEXT Turbo Pumps. PN: B8J200832

0.0

Edwards Mounting Kit Adapts EPS 800 Power Supply to side of nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps. Edwards Part Number: B8J200832. This Edwards adaptive mounting kit is required for the EPS 800 power supply to be mounted to the side of nEXT730D, nEXT930D, or nEXT1230H...

£269⁵²

In stock

+ −

Save 40%

Edwards nEXT930D Turbo Vacuum Pump with Conflat CF 10.0 in. DN200 CF Inlet Flange 925 l/s Pumping Speed Air or Water Cooled. PN: B8K200F00

0.0

Edwards nEXT930D Turbo Vacuum Pump with Conflat CF 10.0" DN200 CF Inlet, 925 l/s Pumping Speed, Air or Water Cooled. Edwards Part Number: B8K200F00. Edwards nEXT930D turbomolecular high vacuum pumps with a DN200 CF, Conflat CF 10.0 inch inlet flange have a pumping speed of 925...

£7,482⁷⁷ £12,471²⁸ -40%

In stock

+ −

Save 40%

Edwards nEXT930D Turbo Vacuum Pump with ISO-K 200 Inlet Flange 925 l/s Pumping Speed Air or Water Cooled. PN: B8K200D00

0.0

Edwards nEXT930D Turbo Vacuum Pump with ISO-K 200 Inlet, 925 l/s Pumping Speed, Air or Water Cooled. Edwards Part Number: B8K200D00. Edwards nEXT930D turbomolecular high vacuum pumps with an ISO-K 200 inlet flange have a pumping speed of 925 liters per second (l/s) and an...

£7,196⁴⁹ £11,994¹⁵ -40%

In stock

+ −

Edwards PRX10 Purge Restrictor for any nEXT Turbo Pump. PN: B58065001

0.0

Edwards PRX10 purge restrictor for any nEXT Series Turbo Pump. Edwards Part Number: B58065001 This Edwards purge gas restrictor sets the flow rate of dry purge gas through the purge port on any nEXT turbo pump. An inert purge gas is used to protect the bearing and motor from...

£152⁰⁶

In stock

+ −

Edwards TAG Turbo and Active Gauge Controller Kit with 200W External 24 VDC Power Supply and 2m AC Power Cord for nEXT Turbo Pumps.

0.0

Edwards TAG Turbo and Active Gauge Controller Kit with 200W External 24 VDC Power Supply and AC Power Cord for nEXT Turbo Pumps. This Edwards TAG Turbo and Active Gauge Controller Kit includes the TAG controller, the matching 200W power supply, and a 2 meter long, US plug 5-15P to...

£1,010³⁵

In stock

+ −

Edwards TAG Turbo and Active Gauge Controller Without 24 VDC Power Supply Used With nEXT Turbo Pumps. PN: D39592000

0.0

Edwards TAG Turbo and Active Gauge Controller, 24 VDC, Without Power Supply, for nEXT Turbo Pumps. Edwards Part Number: D39592000. The TAG is a small, low cost, 24 VDC pumping system controller, suitable for a wide range of vacuum applications. The TAG provides a serial...

£523³⁰

In stock

+ −

Edwards TAV5 24 VDC Normally Closed NC Venting Valve with Accessory Connector for nEXT Turbo Pumps with G 1/8 in. Fitting. PN: B8G200835

0.0

Edwards TAV5 Venting Valve, Accessory Connector, for nEXT85D, nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps, 24 VDC, Normally Closed (NC), G 1/8 in. Fitting. Edwards Part Number: B8G200835. This Edwards TAV5 venting valve can be used on the nEXT85D, nEXT730D, nEXT930D, and...

£685⁸³

In stock

+ −

Edwards TAV5 24 VDC Normally Open NO Venting Valve with 3m Long Unterminated Wire for any nEXT Turbo Pump with G 1/8 in. Fitting. PN: B58066010

0.0

Edwards TAV5 Venting Valve, Unterminated Wire, for any nEXT Turbo Pump, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B58066010 This Edwards TAV5 venting valve can be installed in any nEXT85D, 240D, 300D, 400D, 730D, 930D, or 1230H series turbo pump. This...

£430¹⁹

In stock

+ −

Edwards TAV5 24 VDC Normally Open NO Venting Valve with Accessory Connector for nEXT Turbo Pumps with G 1/8 in. Fitting. PN: B8G200834

0.0

Edwards TAV5 Venting Valve, Accessory Connector, for nEXT85D, nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B8G200834. This Edwards TAV5 venting valve can be used on the nEXT85D, nEXT730D, nEXT930D, and...

£495⁷²

In stock

+ −

Edwards TAV6 24 VDC Normally Open NO Venting Valve with 3m Long Unterminated Wire for any nEXT Turbo Pump with G 1/8 in. Fitting. PN: B58066020

0.0

Edwards TAV6 Venting Valve, Unterminated Wire, for any nEXT Turbo Pump, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B58066020. This Edwards TAV6 venting valve can be installed in any nEXT85D, 240D, 300D, 400D, 730D, 930D, or 1230H series turbo pump....

£337⁸²

In stock

+ −

Edwards TIC Relay Box Without Setpoints Allows TIC Controller To Control Backing Pump Flange Heater Band and Isolation Valve. PN: D39711805

0.0

Edwards TIC Relay Box, Allows TIC To Control Backing Pump, Flange Heater Band and Isolation Valve, No Setpoints. Edwards Part Number: D39711805. This Edwards TIC relay box acts as the control interface between the TIC controller and the mains backing pump, turbo pump flange...

£553⁵⁵

In stock

+ −

Edwards Vent or Purge Port Adapter with G 1/8 in. Fitting to KF-10 Flange for any nEXT Turbo Pump. PN: B58066011

0.0

Edwards Vent or Purge Port Adapter, G 1/8 in. to KF10 for any nEXT Turbo Pumps. Edwards Part Number: B58066011 This Edwards vent or purge port adapter is used to convert the G 1/8 inch (BSPP) female vent or purge port on any nEXT turbo pump to a KF10 NW10 flange. An...

£72⁵⁴

In stock

+ −

Edwards Water Cooling Kit for nEXT Turbo Pumps with Push-Fit Connectors for 8mm OD Hose, and G 1/8 in. Fittings. PN: B8J200820

0.0

Edwards Part Number: B8J200820. This Edwards water cooling unit is optional on the nEXT730D and nEXT930D turbo pumps, and is included standard with nEXT1230H pumps. The water cooling block slides into a slot in the base of the pump and is secured with 4 M4 screws. This water cooling block...

£230⁴⁵

In stock

+ −

Input Power Cord Mains Cable 2m Long 115 VAC for Edwards TIC Controller, Relay Box, TAG Power Supply. US Plug.

0.0

Input Power Cord Mains Cable 2m Long 115 VAC for Edwards TIC Controller, Relay Box, or TAG Power Supply US Plug. This is an input power cord (mains cable), 115 VAC, 2 meters long, with US plug 5-15P to C13 Connector. It is used on the Edwards TIC turbo instrument controller and...

£27⁷¹

In stock

+ −

IVP Input Power Cable Compatible with Edwards Turbo EPS 800, US Plug, Input 240VAC., Output 48 VDC

0.0

IVP Input Power Cord/Mains Cable for EPS 800 Power Supply, US 240 VAC 5-15P Plug, 2.5m Long. This is an IVP power cord (mains cable), 240 VAC, 2.5m long, special for the Edwards EPS 800 power supply. It has a 4 pin screw lock plug which connects to the Edwards EPS 800 power supply on one...

£59⁵⁷

In stock

+ −

IVP Input Power Cord Mains Cable for Edwards EPS 800 Power Supply, 2.5m long, US Plug, Input 115 VAC., Output 48 VDC.

0.0

IVP Input Power Cord/Mains Cable for Edwards EPS 800 Power Supply, 2.5m long, US Plug, Input 115 VAC., Output 48 VDC. This is an IVP power cord (mains cable), 115 VAC, 2.5m long, special for the Edwards EPS 800 power supply. It has a 4 pin screw lock plug which connects to the Edwards EPS...

£59⁵⁷

In stock

+ −