Filters Traps and Silencers :: Edwards Filters And Traps

Save 9%

Edwards E1M18, E2M18, E2M28, & E2M30 Pump, Oil Mist Filter Return Drain Back Kit

0.0

CODE:

Edwards Rotary Vane Pump E1M18, E2M18, E2M28, & E2M30 Pump, EMF Clean Application Oil Return - Mist Filter Drain Back Kit. PN A50420000 When fitted, the Edwards EMF Oil Drain Kit returns oil trapped in the oil mist filter to the pump, through the gas ballast port. This reduces oil loss from...

€315⁶⁰ €346⁰⁹ -9%

In stock

+ −

Save 9%

Edwards EMF10 Oil Mist Filter, KF25 Ports, for RV3, RV5, RV8 & RV12 Vacuum Pumps. PN: A462-26-000

0.0

CODE:

Edwards EMF10 EMF-10 Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, & E2M12 Vacuum Pumps. Edwards Part Number A462-26-000 This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M12. This EMF10 EMF-10 exhaust...

€564²³ €620³¹ -9%

In stock

+ −

Save 10%

Edwards Model 250 Water Cooled Exhaust Trap. PN: A53114000

0.0

CODE:

Edwards Model 250 Water Cooled Exhaust Trap. Edwards Part Number: A53114000. The Edwards Model 250 Water Cooled Exhaust Trap cools the exhaust gases from the pump and causes particulates to collect in the trap. This prevents the collection of particulates in the exhaust system. The exhaust...

€8,251¹⁷ €9,167⁹⁷ -10%

In stock

+ −

Save 9%

Edwards RV Series Pumps RV3, RV5, RV8 and RV12 Gravity Drain Oil Return Kit PN: A50501000

0.0

CODE:

Edwards RV Series Pumps RV3, RV5, RV8 and RV12 Gravity Drain Oil Return Kit PN: A50501000 This is an Edwards XDS5, XDS5c, XDS10C, XDS-10, XDS35i & RV3, RV5, RV8, RV12 Gas Ballast Adapter, with 0.25 mm hole. The install instructions manual in pdf format is available for download below. PN...

€298⁵⁵ €328¹³ -9%

In stock

+ −

Save 9%

Edwards RV Series Pumps, EMF Adjustable Gas Ballast Oil Mist Filter Return Drain Back Kit

0.0

CODE:

Edwards RV Series Pumps RV3, RV5, RV8, RV12, EMF Adjustable Gas Ballast Oil Mist Filter Return Drain Back Kit, PN A505-23-000. The RV Gas Ballast Oil Drain Kits continuously return the oil trapped in the EMF Oil Mist Filter to the pump. When fitted, the pump will operate as if the gas...

€521⁵⁴ €573⁴⁴ -9%

In stock

+ −

Save 9%

Edwards RV Series, SpeediVac 2, E2M0.7, and E2M1.5 Pump, Oil Mist Filter Return Drain Back Kit

0.0

CODE:

Edwards Rotary Vane Pump RV, SpeediVac 2, E2M0.7, and E2M1.5 Series, EMF Clean Application Oil Return - Mist Filter Drain Back Kit. PN A50419000 When fitted, the Edwards EMF Oil Drain Kit returns oil trapped in the oil mist filter to the pump, through the gas ballast port. This reduces oil...

€281⁷⁰ €309³⁸ -9%

In stock

+ −

Save 9%

Edwards Stokes 412-H Replacement Oil Mist Filter Pleated. PN 085052036

0.0

CODE:

Edwards Stokes 412-H Replacement Oil Mist Filter Pleated for 412H-11 Stoke Pumps. PN: 085052036 Edwards Stokes 412-H replacement oil mist filter pleated for Stokes Model 412H-11 rotary piston vacuum pump. Filter Dimensions Lenght: 18" Height: 11" Width: 11"...

€981³⁶ €1,078⁹¹ -9%

In stock

+ −

Save 9%

Edwards XDS35i Dry Scroll Vacuum Pump Filter, for Inlet or Exhaust, KF-40. PN: NRD383000

0.0

CODE:

Edwards XDS35i Dry Scroll Vacuum Pump Filter, for Inlet or Exhaust, KF-40. PN: NRD383000 Edwards Inlet or Exhaust Filter KF40 NW40 for XDS35i dry scroll pumps. The inlet dust filter has two functions. It can be connected inline between the pump inlet and your chamber outlet connection to...

€1,145¹⁷ €1,258⁵⁹ -9%

In stock

+ −

Save 8%

Inlet Filter for all Edwards E1M175, E1M275, E2175, E2M275 Rotary Vane Vacuum Pumps, Inclkuding "S" Models, Stainless Steel Mesh

0.0

CODE:

Inlet Filter for all Edwards E1M175, E1M275, E2175, E2M275 including "S" Models, Rotary Vane Vacuum Pumps, Stainless Steel Mesh PN: 22305011 This conical Stainless Steel Inlet Filter fits all Edwards rotary vacuum pumps models E1M175, E1M275, E2M175, E2M275, including "S" versions....

€162²⁸ €177³⁴ -8%

In stock

+ −

Save 11%

Inlet Filter for Edwards EDM6, EDM12, EDM20, ED75, ED100, ED150, ED200 Rotary Vane Vacuum Pumps, Stainless Steel Mesh

0.0

CODE:

Inlet Filter for Edwards EDM6, EDM12, EDM20, ED75, ED100, ED150, ED200 Rotary Vane Vacuum Pumps, Stainless Steel Mesh PN: 01403026 This conical Stainless Steel Inlet Filter fits Edwards rotary vacuum pumps, models EDM6, EDM12, EDM20, ED75, ED100, ED150, ED200 This filter is used on the...

€31³³ €35¹⁶ -11%

In stock

+ −

Save 9%

NEW Activated Alumina For Edwards FL20K Foreline Inlet Trap - 0.45kg size PN H026-00-050

0.0

CODE:

NEW Activated Alumina For Edwards FL20K Foreline Inlet Trap - 0.45kg container size (Edwards Part Number H026-00-050) This is a 0.45 kg container of activated alumina for the Edwards FL20K Foreline Inlet Trap. The activated alumina sorbent has the following benefits; Exceptional trapping...

€178⁷³ €196⁰⁹ -9%

In stock

+ −

Save 9%

NEW Charcoal (Activated Carbon) For Edwards ITC20K Inlet Chemical Trap 3 kg container size

0.0

CODE:

NEW Charcoal (Activated Carbon) For Edwards ITC20K (ITC-20-K) Inlet Chemical Trap 3 kg container size (Edwards Part Number H122-05-002) This is a 3 kg container of charcoal (activated carbon) for the Edwards ITC20K (ITC-20-K) Inlet Chemical Trap. The ITC20K (ITC-20-K) Inlet Chemical part...

€376⁷⁸ €414⁰⁶ -9%

In stock

+ −

Save 9%

NEW Edwards Disposable Liners for Model 250 Water Cooled Exhuast Trap PN A53115020

0.0

CODE:

NEW Edwards Disposable Liners for Model 250 Water Cooled Exhuast Trap (Edwards PN A53115020) These Disposable Liners are designed to fit the Model 250 Water-Cooled Exhaust Trap. The exhaust trap cools the exhaust gases from the pump and causes particulates to collect on the liners in the...

€869¹⁷ €956²⁵ -9%

In stock

+ −

Save 9%

NEW Edwards Dust Filter Element and Gasket Kit for ITF20K Inlet Dust Filter PN A442-01-800

0.0

CODE:

NEW Edwards Dust Filter Element and Gasket Kit for ITF20K Inlet Dust Filter part no. A442-01-800 These Edwards ITF20K ITF-20-K dust element prevents the entry of dust particles in the pump. The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 pump by about 20% at 1 mbar...

€488¹³ €535⁹⁴ -9%

In stock

+ −

Save 8%

NEW Edwards EMF20 Oil Mist Filter, KF25 Ports, for RV12, E1M18, E2M18 Vacuum Pumps, A462-29-000

0.0

CODE:

NEW Edwards EMF20 (EMF-20) Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV12, E1M18, E2M18 Vacuum Pumps (Edwards Part Number A462-29-000) This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18. This EMF20 (EMF-20) exhaust filter assembly is...

€644⁰¹ €703¹³ -8%

In stock

+ −

Save 9%

NEW Edwards EMF3 Oil Mist Filter, KF10 Ports, for E2M0.7, E2M1, E2M1.5 Vacuum Pumps, A462-20-000

0.0

CODE:

NEW Edwards EMF3 (EMF-3) Oil Mist Exhaust Filter, KF10 Ports, Designed for Edwards for Speedivac 2, E2M0.7, E2M1, E2M1.5, E2M2 Vacuum Pumps (Edwards Part Number A462-20-000) This EMF3 (EMF-3) Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M2. This Edwards EMF3...

€431⁶³ €474²² -9%

In stock

+ −

Save 9%

NEW Edwards FL20K Foreline Inlet Trap - For all KF25 Rotary Vane Pumps PN A133-05-000

0.0

CODE:

NEW Edwards FL20K (FL-20-K) Foreline Inlet Trap - For all KF25 Rotary Vane Pumps (Edwards Part Number A133-05-000) The Edwards FL20K (FL-20-K) foreline inlet trap has been developed for use in clean pumping systems, to prevent the back-migration of rotary pump oil mist into the system....

€802¹⁸ €881²⁵ -9%

In stock

+ −

Save 9%

NEW Edwards ITC20K Vacuum Pump Inlet Chemical Trap, KF25, Part Number A444-10-000

0.0

CODE:

NEW Edwards ITC20K Inlet Chemical Trap - KF25 (Edwards Part Number A444-10-000) The Edwards ITC20K Series Chemical Trap Provides the following benefits: Protection against various aggressive or heavy lacquer forming vapors, which may attack the pump or contaminate pump oil. Prevent high...

€2,022³⁸ €2,223⁴⁴ -9%

In stock

+ −

Save 9%

NEW Edwards ITF20K Vacuum Pump Inlet Dust Filter, KF25, Edwards Part Number A442-15-000

0.0

CODE:

NEW Edwards ITF20K (ITF-20-K) Vacuum Pump Inlet Dust Filter - KF25 (Edwards Part Number A442-15-000) The ITF20K (ITF-20-K) Inlet Dust filters prevent the entry of dust particles in the pump. The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 pump by about 20% at 1 mbar...

€1,426⁸⁸ €1,569⁵³ -9%

In stock

+ −

Save 9%

New Edwards ITO20K Vacuum Inlet CATCHPOT with KF25 flanges , Part Number A441-10-000

0.0

CODE:

NEW Edwards ITO20K Inlet CATCHPOT - KF25 (Edwards Part Number A441-10-000) The Edwards ITO20K Inlet CATCHPOT Provides the following benefits: The ITO Inlet Catchpot is used on vacuum processes where large quantities of vapour are produced. The catchpot traps liquid that would otherwise...

€1,214⁴⁵ €1,335¹⁶ -9%

In stock

+ −

Save 9%

NEW Edwards ITO800 Inlet Catchpot, ISO100, Edwards Part Number A441-04-000

0.0

CODE:

NEW Edwards ITO800 Inlet Catchpot, ISO100, (Edwards Part Number A441-04-000) This NEW ITO800 Inlet Catchpot is used on vacuum processes where large quantities of vapour are produced. The catchpot traps liquid that would otherwise condense in the pipelines and drain towards the pump. The...

€2,370⁷⁰ €2,605⁴⁷ -9%

In stock

+ −

Save 9%

NEW Edwards MF100 MF-100 Oil Mist Filter PN A462-03-000

0.0

CODE:

NEW Edwards MF100 Oil Mist Filter PN A462-03-000, Edwards PN A46203000 The MF 100 Oil Mist Filter removes oil mist (vapor) from the process gases exhausted from the outlet of an oil sealed pump. The filters remove both odor and oil vapor and so prevent it from reaching the atmosphere and the...

€1,787⁶⁶ €1,965⁶³ -9%

In stock

+ −

Save 9%

NEW Edwards MF30 Oil Mist Filter for E2M28 and E2M30 PN A462-33-000

0.0

CODE:

NEW Edwards MF30 (MF-30) Oil Mist Filter for E2M28 and E2M30 (Edwards Part Number A462-33-000) This MF30 (MF-30) Outlet Oil Mist Filter is suitable for the Edwards Rotary Vane pumps E2M28 and E2M30. Supplied with NW25 clamp, NW25 90 degree Elbow, centering rings, O-Rings, 2 NW25 to 3/4 BSP...

€1,868⁶⁶ €2,054⁶⁹ -9%

In stock

+ −

Save 9%

NEW Edwards MF300 MF-300 Oil Mist Filter PN A462-04-000

0.0

CODE:

NEW Edwards MF300 Oil Mist Filter PN A462-04-000, Edwards PN A46204000 The MF300 Oil Mist Filter removes oil mist (vapor) from the process gases exhausted from the outlet of an oil sealed pump. The filters remove both odor and oil vapor and so prevent it from reaching the atmosphere and the...

€2,929⁶⁹ €3,222⁶⁶ -9%

In stock

+ −