Newest - page 74

Vacuum Cube, 12x12 Vacuum Chamber Plate With One LF ISO-200 Pumping or Feedthrough Port

0.0

CODE:

These Vacuum Cube 12x12 inch plate with quantity one each LF ISO-200 pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These ISO-200 ported plates are build with our patent pending taper seal technology which incorporates...

$554²²

In stock

+ −

Varian CDG-500 Capacitance Vacuum Gauge, 1000 Torr, 8 VCR, No Set Points, CDG500T1000VCR8

0.0

CODE:

Varian CDG-500 Capacitance Diaphragm Manometer Gauge, No set points. Pressure Range: 1000 Torr, VCR8 Flange. Works with Agilent XGS-600 Vacuum Gauge Controller and the Active Gauge Controllers AGC-100, AGD-100. Agilent Varian PN CDG500T1000VCR8. The Capacitance Diaphragm Gauge CDG-500 is...

$2,120⁴⁶

Out of stock

Vacuum Cube, 12x12 Vacuum Chamber Plate With One LF ISO-160 Pumping or Feedthrough Port

0.0

CODE:

These Vacuum Cube 12x12 inch plate with quantity one each LF ISO-160 pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These ISO-160 ported plates are build with our patent pending taper seal technology which incorporates...

$465⁵⁵

In stock

+ −

Vacuum Cube, 12x12 Vacuum Chamber Plate With One LF ISO-100 Pumping or Feedthrough Port

0.0

CODE:

These Vacuum Cube 12x12 inch plate with quantity one each LF ISO-100 pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These ISO-100 ported plates are build with our patent pending taper seal technology which incorporates...

$443³⁸

In stock

+ −

Save 2%

Electrical Coaxial Feedthrough, SHV-5, 4 Pin, Grounded Shield, KF40

0.0

CODE:

Air side connections included Safe High Voltage Connector (SHV) RF coaxial feedthroughs are typically used for connecting radio frequency electronic equipment with miniature-to-subminiature coaxial cable. BNC series are commonly used for low power transmission and are rated to 500...

$663⁵³ $680⁰⁰ -2%

In stock

+ −

Save 7%

Leybold AK 4-8 Condensate Separator Trap, for Leybold Trivac B, D4B, D8B, P/N 18806

0.0

CODE:

NEW Leybold AK 4-8 Condensate Separator Trap, for Leybold D 4B, D 8B, P/N 18806 The AK 4-8 Condensate Separator Trap is ideally suited for applications generating large quantities of water vapor or other condensibles, which could conceivably become entrained in the pump fluid. By the use of...

$1,333²⁹ $1,433⁰⁰ -7%

In stock

+ −

Save 8%

Leybold RT Copper Filter Media for RST16KF Refillable Traps P/N 99171145 - 1.5 oz.

0.0

CODE:

NEW Leybold RT Copper Filter Media for RST40KF Refillable Traps -1.5 oz. - P/N 99171145 This is RT Copper filter media for Leybold RST Refillable Traps, used for standard applications. Fits RST 16KF Refillable Traps. (RST Trap not included but sold on this website). For...

$156²³ $170⁰⁰ -8%

In stock

+ −

Save 5%

Leybold RT Copper Filter Media for RST40KF Refillable Traps P/N 99171147 - 3 1/4 in wide

0.0

CODE:

NEW Leybold RT Copper Filter Media for RST40KF Refillable Traps - 3 1/4 in wide - P/N 99171147 This is RT Copper filter media for Leybold RST Refillable Traps, used for standard applications. Fits RST 40KF Refillable Traps. (RST Trap not included but sold on this website). For...

$171⁶⁶ $180⁰⁰ -5%

In stock

+ −

Ideal Vacuum Ethernet Bulkhead Double-Ended Feedthrough, Stainless Steel with Viton O-Ring, for 1 in. Hole Through

0.0

This Ideal Vacuum ethernet bulkhead double-ended feedthrough is constructed of stainless steel, has a 1-14 UN x .95 thread, and a Viton O-ring for an hermetic seal. This ehtrenet feedthrough requires a 1" hole and can have a bulkhead up to 3/4" thick. Feedthroughs (or vacuum feedthroughs) come...

$597⁶⁰

In stock

+ −

Ideal Vacuum HDMI Feedthrough Double-Ended Jack, Weld-On Tube to KF 40 Flange, Stainless Steel Housing

0.0

Ideal Vacuum Hermetic HDMI Feedthrough double-ended Jack, NW40 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to...

$882⁰⁰

In stock

+ −

Agilent Varian Fan Air Cooling Kit For Large TwisTorr and Turbo-V Turbomolecular Pumps With Remote Rack Mount Controller, PN: X3501-68001

0.0

Agilent Varian Fan Air Cooling Kit For Large TwisTorr and Turbo-V Turbomolecular Pumps With Remote Rack Mount Controller. Agilent Varian Part Number PN: X3500-68011. This Agilent Varian air fan cooling kit for large TwisTorr FS and Turbo-V turbomolecular vacuum pumps, the cooling fan...

$940⁰⁰

In stock

+ −

Agilent Varian ISO-160 Inlet Screen, Splinter Shield, Used To Protect The Turbo Pump From Foreign Objects, PN: X3500-68001

0.0

Agilent Varian ISO-160 Inlet Screen, Splinter Shield, Used To Protect The Turbo Pump From Foreign Objects. Agilent Varian Part Number PN: X3500-68001. These Agilent Varian inlet screens are designed to protect the TwisTorr turbo molecular vacuum pumps with ISO-160 intake flanges. The...

$294⁷³

In stock

+ −

Agilent Varian Conflat Turbo CF 8 Inch Inlet Screen, Splinter Shield, Used To Protect The Turbo Pump From Foreign Objects, PN 9699304

0.0

Agilent Varian Conflat Turbo CF 8 Inch Inlet Screen, Splinter Shield, Used To Protect The Turbo Pump From Foreign Objects. Agilent Varian Part Number PN 9699304. These Agilent Varian inlet screens are designed to protect the TwisTorr turbo molecular vacuum pumps with Conflat CF 8...

$279⁰⁸

In stock

+ −

ISO 100 4 in. ID, Pin and Bearing Kit for HVA Manual Gate Valves PN KPB40S-98

0.0

CODE:

ISO 100 Pin and Bearing Kit for HVA Manual Gate Valves HVA Part Number: KPB40M-97 This is a Pin and Bearing Kit for HVA Gate Valves ISO 100. For installation and maintenance instructions see .pdf to the side at Downloads. This Kit Fits the Following HVA Elastomer Viton Sealed...

$1,092⁷⁰

In stock

+ −

LF ISO63 or CF 4.5 in. - 2.5 in. ID Pin and Bearing Kit for HVA Manual Gate Valves PN KPB25-98

0.0

CODE:

LF ISO63 or CF 4.5 in. Pin and Bearing Kit for HVA Manual Gate Valves HVA Part Number: KPB25-98 This is a Pin and Bearing Kit for HVA Gate Valves LF ISO63 and CF 4.5 in. For installation and maintenance instructions see .pdf to the side at Downloads. This Kit Fits the Following HVA...

$592⁹¹

In stock

+ −

CF 10 in. - 8 in. ID Pin and Bearing Kit for HVA Manual Gate Valves PN KPB80M-96

0.0

CODE:

CF 10 in. Pin and Bearing Kit for HVA Manual Gate Valves HVA Part Number: KPB80M-96 This is a Pin and Bearing Kit for HVA Gate Valves CF 10 in. For installation and maintenance instructions see .pdf to the side at Downloads. This Kit Fits the Following HVA Elastomer Viton Sealed...

$1,314⁵⁴

In stock

+ −

Pfeiffer Adixen 2010SD 2010 SD Pascal Dual Stage Rotary Vane Vacuum Pump - 3 phase 208-240/440-480 VAC, 50/60 Hz (USA Version)

0.0

CODE:

The Pfeiffer Adixen 2010SD 2010 SD Dual Stage Rotary Vane Vacuum Pump is designed and manufactured to meet the demanding requirements of various industrial and scientific applications. Thanks to a very simple and highly reliable design, the Pfeiffer Adixen 2010SD 2010 SD dual stage rotary vane...

$3,860⁰⁰

In stock

+ −

Alcatel Adixen 2010SD 2010 SD Pascal Dual Stage Rotary Vane Vacuum Pump - 1 phase 115/220VAC

0.0

CODE:

The Alcatel Adixen 2010SD 2010 SD Dual Stage Rotary Vane Vacuum Pump is designed and manufactured to meet the demanding requirements of various industrial and scientific applications. Thanks to a very simple and highly reliable design, the Alcatel Adixen 2010SD 2010 SD dual stage rotary vane...

$3,860⁰⁰

In stock

+ −

Alcatel Adixen 2005SD 2005 SD Pascal Dual Stage Rotary Vane Vacuum Pump - 1 phase 115/220VAC

0.0

CODE:

The Alcatel Adixen 2005SD 2005 SD Dual Stage Rotary Vane Vacuum Pump is designed and manufactured to meet the demanding requirements of various industrial and scientific applications. Thanks to a very simple and highly reliable design, the Alcatel Adixen 2005SD 2005 SD dual stage rotary vane...

$3,280⁰⁰

In stock

+ −

Ideal Vacuum HDMI Feedthrough, Double-Ended Jack, Stainless Steel Housing with CF2.75 Flange

0.0

Ideal Vacuum Hermetic HDMI feedthrough double-ended Jack CF2.75 flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to...

$958⁹¹

In stock

+ −

Ideal Vacuum HDMI Bulkhead Double-Ended Feedthrough, Stainless Steel with Viton O-Ring, for 1 in. Hole Through

0.0

This Ideal Vacuum bulkhead feedthrough has female HDMI connectors on either side. It is constructed of 304L stainless steel, has 1-14 UN x .95 thread and a Viton O-ring for a hermetic seal. This HDMI feedthrough requires a 1" diameter hole and the bulkhead can be up to 3/4" thick....

$869⁴⁰

In stock

+ −

Vacuum Cube, 12x12 Vacuum Chamber Plate With One LF ISO-63 Pumping or Feedthrough Port

0.0

CODE:

These Vacuum Cube 12x12 inch plate with quantity one each LF ISO-63 pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These LF ISO-63 ported plates are build with our patent pending taper seal technology which incorporates...

$442²⁸

In stock

+ −

Vacuum Cube, 12x12 Vacuum Chamber, Plate With KF Ports: 1xKF50, 2xKF40, 2xKF25, 2xKF16

0.0

CODE:

These Vacuum Cube 12x12 inch plate with assorted pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These ported plates are built with our patent pending taper seal technology which incorporates sloped sealing features to...

$580³³

In stock

+ −

Vacuum Cube, 12x12 Vacuum Chamber, Plate With KF Ports: 1xISO63, 4xKF25

0.0

CODE:

These Vacuum Cube 12x12 inch plate with assorted pumping and or feedthrough ports are designed to fit our 12x12x12 vacuum cubes (each cube require 6 plates). These ported plates are built with our patent pending taper seal technology which incorporates sloped sealing features to...

$498⁵³

In stock

+ −