Newest

Save 9%
0.0
41-1501
NEW Welch 1397, 1374 Vacuum Pump Exhuast Dust Cap (PN 41-1501) This is a Welch Dust Cap for 1397 and 1374 DuoSeal Belt Drive Rotary Vane Vacuum Pumps.
$52503 $57700 -9%
In stock
+
0.0
Agilent Varian Turbo-V 81-AG Navigator Solid State Vacuum Pump Controller PN 9698996 This Agilent Varian Turbo-V81-AG Navigator Controller is a single-state controlled frequency converter with the following features. Drives the pumps of the Turbo-V81 Family. Powers the pump cooling...
$2,22960
In stock
+
0.0
P107233
Agilent Varian FRG-720 Pirani and Bayard Alpert B/A Sensor Combination Gauge with LED Display. Single Filament, Hot Cathode Ion, 760 to 3.8 X 10 -10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG720CF35D. This Agilent Varian Hot Cathode Ion Gauge is a Pirani and Bayard...
$2,35882
In stock
+
Save 9%
0.0
S3109-99
Welch Internal Filter Replacement for CRVpro 4, 6, 8 Rotary Vane Pumps PN: S3109-99 This is a replacement Welch Vacuum Filter for CRVpro 4, CRVpro 6 and CRVpro8 rotary vane vacuum pumps. This filter caprures oil fog, mist or smoke from the exhaust.
$6004 $6600 -9%
In stock
+
0.0
P107228
Agilent Varian FRG-720 KF25 Pirani and Bayard Alpert B/A Sensor Single Filament Combination Gauge With Profibus Connector and Set Points. Hot Cathode Ion, Pressure Range 760 to 3.8 X 10 -10 Torr, KF25, Agilent Varian PN FRG720KF25SP. This Agilent Varian Gauge is a Pirani and Bayard...
$2,84852
Out of stock
0.0
P107227
Agilent Varian FRG-720 KF25 Pirani and Bayard Alpert B/A Sensor Combination Gauge With Single Filament, LED Display. Hot Cathode Ion, Pressure Range 760 to 3.8 X 10 -10 Torr, KF25, Agilent Varian PN FRG720KF25D. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge,...
$2,29510
Out of stock
0.0
P104155
Agilent Varian FRG-720 KF25 Pirani and Bayard Alpert B/A Sensor Combination Gauge. Single Filament. Hot Cathode Ion, 760 to 3.8 X 10 -10 Torr. Agilent Varian PN FRG720KF25. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, hot cathode ionization design single...
$2,01190
In stock
+
0.0
P107362
These self-adhering mount K-Type thermocouples provide a rapid response (less than 0.15 seconds) and can be operated up to temperatures of 260°C (500°F) or can be cemented in place for use at temperatures up to 315°C (600°F). They use a polyimide and fiberglass junction insulation along with a...
$6514
In stock
+
0.0
P1011285
This splitter adapter kit allows two heaters to be connected simultaneously to the Vacuum PID Plug & Play Heater Control System. For systems requiring multiple heaters for better heat distribution, or in multiple locations, this is the solution. The splitter is rated for total heater loads of...
$7908
In stock
+
Save 10%
0.0
P102004
The Welch CRV pro series direct drive rotary vane pumps offer superior reliability, long service life and can handle a variety of low vacuum needs. The Welch CRV pro series pumps are factory prepared with oil cases coated with PTFE (Polytetrafluoroethylene) commonly know as Teflon®. The outer...
$4,00050 $4,44500 -10%
In stock
+
Save 10%
0.0
P107819
The Welch CRV pro series direct drive rotary vane pumps offer superior reliability, long service life and can handle a variety of low vacuum needs. The Welch CRV pro series pumps are factory prepared with oil cases coated with PTFE (Polytetrafluoroethylene) commonly know as Teflon®. The outer...
$3,13875 $3,48750 -10%
In stock
+
Save 10%
0.0
P107818
The Welch CRV pro series direct drive rotary vane pumps offer superior reliability, long service life and can handle a variety of low vacuum needs. The Welch CRV pro series pumps are factory prepared with oil cases coated with PTFE (Polytetrafluoroethylene) commonly know as Teflon®. The outer...
$3,48750 $3,87500 -10%
In stock
+
0.0
P1011284
This is a spare C20 power entry plug which connects a heater to the Ideal Vacuum Heater Control System (P107361). Using 12 gauge wire, these power plugs are rated for heater loads of up to 2400W at 120 VAC, and 4800W at 240 VAC. These spare C20 power plugs allow a user to pre-wire an additional...
$1999
In stock
+
0.0
P104402
These bolt kits contain silver-plated Allen head bolts and washers to fasten tapped hole 1.33 (1-1/3) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange...
$3099
In stock
+
0.0
These replacement Viton O-ring seals are used on all 20 inch Ideal Vacuum aluminum and stainless welded chambers to seal door. Replacement of the O-ring seal is needed if the O-ring has physical damage or permanent deformation causing poor vacuum performance. These seals are fitted into the...
$7748
In stock
+
Save 8%
0.0
Welch Replacement Filter Media for Cannister Filter for 1399,1400, 8905, 8890, 8890A Pumps with Inlet 3/4 - 20 Fine Thread For Pumps up to 4 CFM This the Filter Replacement Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Fits Welch Cannister Filters on...
$10476 $11400 -8%
In stock
+
0.0
P109032
This cooling plate adapter kit is used to connect 2  Vacuum Cube 12x12 cooling plates to one Thermo Scientific Neslab model Arctic, AC200 A25, AC200 A40, or Accel 500LT cooler. The kit branches the main cooling line off to a secondary cooling plate attached to a second 12x12 Vacuum Cube,...
$84092
In stock
+
0.0
P1012253
This hardware kit is specifically for Vacuum Cube plates that have a Conflat 10.0" port with tapped bolt threads. The kit consists of twenty-four (24) silver-plated, 12-point bolts, 5/16-24 x 1.0", and twenty-four (24) stainless steel washers. The 1.0" screws are slightly shorter than the...
$12384
In stock
+
Save 9%
0.0
Welch 1399, 1400, 8905, 8890, 8890A, Mist Exhaust Filter with Inlet 3/4 - 20 Fine Thread For Vacuum Pumps up to 4 CFM This Compact Oil Mist Filter  comes with Filter Media  and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel...
$25234 $27700 -9%
In stock
+
Save 9%
0.0
320015
Welch Oil Mist Separator, KF-16, NW16, AKD 16, PN 320015 This Welch Oil Mist Separator is mounted to the outlet of a rotary vane pump (belt or direct drive) and removes oil particles from the exhaust stream. This minimizes and contains oil loss to the atmosphere. This oil mist separator has a...
$88785 $97500 -9%
In stock
+
0.0
P101252
Bellows Hose Metal KF-40, 10 Inch, Thick Wall Tubing, ISO-KF Flange Size NW-40, Stainless Steel These KF-40 Metal Hose Bellows Flex Coupling (10 inch, thick wall) vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are unsheathed and butt welded. Commonly used to...
$19340
In stock
+
Save 8%
0.0
P101238
Bellows Hose Metal KF-25, 4 Inch, Flex Coupling, ISO-KF Flange Size NW-25, Stainless Steel These KF-25 Bellows Flex Coupling vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are commonly used to build foreline vacuum plumbing and process systems. They are often...
$10082 $10900 -8%
In stock
+
Save 9%
0.0
P101237
These KF-16 Bellows Flex Coupling vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and...
$8107 $8900 -9%
In stock
+
0.0
P103965
NEW Varian FRG-700 DIY Full Range Gauge Kit For TPS-Compact, MiniTask 81, AG Turbo Controllers, and the Ideal Vacuum iCart Dry System. Kit is for Conflat CF CFF 2.75 inch Inlet to Conflat CF CFF 6.00 inch fitting. These Varian FRG-700 full range active pressure gauge kits are designed...
$3,14158
In stock
+
Show another 24 products