Newest - page 50

Edwards TAV5 24 VDC Normally Open NO Venting Valve with Accessory Connector for nEXT Turbo Pumps with G 1/8 in. Fitting. PN: B8G200834

0.0

Edwards TAV5 Venting Valve, Accessory Connector, for nEXT85D, nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B8G200834. This Edwards TAV5 venting valve can be used on the nEXT85D, nEXT730D, nEXT930D, and...

$931⁹⁶

In stock

+ −

Save 20%

Leybold RuVac WSU-501 Roots Blower Booster Vacuum Pump, PFPE LVO-400, 3-Phase, 208-230/460 VAC. PN: 11738

0.0

CODE:

The Leybold WSU 501 WSU-501 PFPE chemical series Roots blower vacuum pumps are driven by air cooled motors. They have no shaft feedthrough to the atmosphere, thus the Leybold WSU 501 WSU-501 is particularly leaktight. In the canned motor, rotor and stator pack are separated by a vacuum-tight can...

$17,197⁶⁰ $21,497⁰⁰ -20%

In stock

+ −

Edwards 1.5m Long Accessory Extension Cable with Unterminated Bare Wire End for nEXT Turbo Pump Accessories. PN: B8G200839

0.0

Edwards Accessory Extension Cable with Bare Wire End for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories, 1.5 m Long. Edwards Part Number: B8G200839. This Edwards accessory extension cable attaches on one end of a nEXT85D, nEXT730D, nEXT930D, or nEXT1230H...

$143⁴⁶

In stock

+ −

Vacuum Cube, Conductance Limiting Coupler Insert, 0.5 mm dia. Orifice, 6X6 in. Plate, 6061-T6 Aluminum Alloy

0.0

CODE:

This is an Vacuum Products IVP, 0.5 mm diameter orifice hole insert for the 6x6 Vacuum Cube. It mates between two IVP vacuum cube chambers and with a pin hole 0.5 mm orifice diameter becomes a conductance limiting coupler. A conductance limiting plate is needed to mate the...

$127¹³

In stock

+ −

Vacuum Cube, Conductance Limiting Plate Coupler Kit for 6X6 in. Cube Frame Opening, Aluminum

0.0

CODE:

This is an Vacuum Products IVP, Vacuum Cube, Conductance Limiting Plate Coupler Kit for a 6x6 Vacuum Cube frame opening. The plate coupler is designed for two purposes: 1) Firmly hold any Vacuum conductance limiting coupler insert to the plate and 2) Create...

$220⁵⁹

In stock

+ −

Save 9%

Adapter KF-25 to Rubber Hose Nozzle, 8mm or 1/4 to 5/16in. ID, ISO-KF Flange Size NW-25, Stainless Steel

0.0

CODE:

Adapter KF-25 to Rubber Hose Nozzle, 8mm or 1/4 to 5/16in. ID, ISO-KF Flange Size NW-25, Stainless Steel These adapter rubber hose nozzles are KF-25 to rubber hose and fit a 8mm or 1/4 to 5/16in. ID rubber hose. The flange size follows ISO-KF standards and is NW-25. They are commonly used to...

$41⁰⁰ $45⁰⁰ -9%

In stock

+ −

Save 9%

Adapter KF-16 to Rubber Hose Nozzle, 1/2 in. ID, ISO KF Flange Size NW-16, Stainless Steel

0.0

CODE:

Adapter KF-16 to Rubber Hose Nozzle, 1/2 inch ID, ISO KF Flange Size NW-16, Stainless Steel These adapter rubber hose nozzles are KF-16 to rubber hose and fit a 12.7 mm or 1/2 inch ID. Will not fit 12mm ID hose. The flange size follows ISO-KF standards and is NW-16. They are commonly used to...

$41⁰⁰ $45⁰⁰ -9%

In stock

+ −

Save 10%

Adapter KF-10 to 8 mm or 1/4 to 5/16 in. ID Rubber Hose, ISO KF Flange Size NW-10, Stainless Steel

0.0

CODE:

Adapter KF-10 to 8 mm or 1/4 to 5/16 in. ID Rubber Hose, ISO KF Flange Size NW-10, Stainless Steel These adapter rubber hose nozzles are KF-10 to rubber hose and fit a 8 mm ID rubber hose (1/4 to 5/16 in.). The flange size follows ISO-KF standards and is NW-10. They are commonly used to make...

$39⁶⁴ $44⁰⁰ -10%

In stock

+ −

Save 20%

Leybold RuVac WSU-251 Roots Blower Booster Vacuum Pump, PFPE LVO-400, 3-Phase, 208-230/460 VAC. PN 11728

0.0

CODE:

The Leybold WSU 251 WSU-251 PFPE chemical series Roots blower vacuum pumps are driven by air cooled motors. They have no shaft feedthrough to the atmosphere, thus the Leybold WSU 251 WSU-251 is particularly leak-tight. In the canned motor, rotor and stator pack are separated by a vacuum-tight...

$12,704⁰⁰ $15,880⁰⁰ -20%

In stock

+ −

Save 20%

Leybold RuVac WSU-501 Roots Blower Booster Vacuum Pump, Hydrocarbon LVO-100, 3-phase, 208-230/460 VAC. PN 11733

0.0

CODE:

The Leybold WSU 501 WSU-501 HYRDOCARBON OIL standard series Root's blower vacuum pumps are driven by air cooled motors. They have no shaft feedthrough to the atmosphere, thus the Leybold WSU 501 WSU-501 is particularly leaktight. In the canned motor, rotor and stator pack are separated by a...

$16,130⁴⁰ $20,163⁰⁰ -20%

In stock

+ −

Leybold RuVac WSU-251 Roots Blower Booster Vacuum Pump, Hydrocarbon LVO-100, 3-phase, 208-230/460 VAC. PN 11723

0.0

CODE:

The Leybold WSU 251 WSU-251 HYDROCARBON OIL standard series Root's blower vacuum pumps are driven by air cooled motors. They have no shaft feedthrough to the atmosphere, thus the Leybold WSU 251 WSU-251 is particularly leaktight. In the canned motor, rotor and stator pack are separated by a...

$15,944⁰⁰

In stock

+ −

Agilent Varian 563 Glass Ion Tungsten Filament Gauge 2.75 inch CF Kovar Flange, PN K2466303

0.0

CODE:

Varian Agilent 563 Glass Ion Gauge Tube, Tungsten filament, 2.75 inch CF Conflat Kovar Flange, Vacuum Pressure Gauge. PN:K2466303 These Ion Gauge Tubes have a 2.75 inch CF Conflat vacuum connection and an operating range from 1x10-3 to 2x10-10 Torr. These ion gauge tubes are compatible...

$547⁸³

Out of stock

Agilent Varian 563 Glass Ion Tungsten Filament Gauge 1 inch NONEX Tube, PN K2466301

0.0

CODE:

Varian Agilent 563 Glass Ion Gauge Tube, Tungsten filament, 1 inch NONEX Port, Vacuum Pressure Gauge. PN:K2466301 These Ion Gauge Tubes have a 1 inch port vacuum connection and an operating range from 1x10-3 to 2x10-10 Torr. These ion gauge tubes are compatible with most modern hot...

$424⁷²

In stock

+ −

Edwards 0.2m Long Male-to-Female Accessory Port Extension Cable for nEXT Turbo Pump Accessories. PN: B8G200836

0.0

Edwards Accessory Extension Cable for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories, 0.2 m Long. Edwards Part Number: B8G200836. This Edwards accessory extension cable attaches to the accessory port, or the accessory Y connector (part number P1012518) on a...

$175³²

In stock

+ −

Edwards Accessory Y Connector for nEXT Turbo Pump Accessories. PN: B8G200837

0.0

Edwards Accessory Y Connector for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories. Edwards Part Number: B8G200837. This Edwards Accessory Y Connector attaches to the accessory port on a nEXT85D, nEXT730D, nEXT930D, and nEXT1230H turbo pump and allows two...

$159³⁹

In stock

+ −

Edwards Bearing Tool Kit for nEXT Turbo Pumps. PN: B8G200845

0.0

Edwards Bearing Tool Kit for nEXT85D Turbo Pumps. Edwards Part Number: B8G200845. This is an Edwards bearing replacement tool kit for nEXT85D turbo pumps. This tool kit is required to remove and replace the bearing at the base of the pump (bearing and oil cartridge kit...

$885²¹

In stock

+ −

Edwards Bearing and Oil Cartridge Kit for nEXT Turbo Pumps. PN: B8G200811

0.0

Edwards Bearing and Oil Cartridge Kit for nEXT85D Turbo Pumps. Edwards Part Number: B8G200811. This is an Edwards replacement bearing and oil cartridge kit for nEXT85D turbo pumps. The bearing and oil cartridge are typically replaced at the same time and can be serviced...

$1,039⁸¹

In stock

+ −

Edwards Oil Cartridge Kit for nEXT Turbo Pumps. PN: B8G200828

0.0

Edwards Oil Cartridge Kit for nEXT85D Turbo Pumps. Edwards Part Number: B8G200828. This is an Edwards replacement oil cartridge for nEXT85D turbo pumps. It provides lubrication for the bearing at the bottom of the pump. The oil cartridge can be replaced on-site. Access to the...

$331¹¹

In stock

+ −

Vacuum Cube, 6x6 in. Vacuum Chamber, Zero Length Adapter Plate for ISO-63 Tapped Flange

0.0

CODE:

This Vacuum Cube 6x6 inch ISO-63 zero length adapter plate allows the compact connection of a tapped ISO-63 flange directly to a 6x6 inch vacuum cube frame. With this adapter it is now possible to isolate adjacent vacuum chambers with an ISO-63 gate valve, without the use of...

$174⁹⁷

In stock

+ −

Vacuum Cube Custom Plate 6X6X2.5 Cube Frame with KF16 Side Plates

0.0

CODE:

Custom 6x6x2.5 Vacuum Cube Frame, Accepts One 6x6 Vacuum Cube Plate, Side Port KF-16, 3X3 1/4"-20 tapped hole pattern in chamber floor with SS helical inserts, 2x2 1/4"-20 tapped hole pattern in chamber reverse with SS helical inserts, 6061-T6 Aluminum Frame. Vacuum...

$1,278⁰²

In stock

+ −

Vacuum Cube Uncoated 12x12 to single 6x6 Plate Adapter Kit, Includes One 12x12 O-Ring, One 6x6 O-Ring, and 28 bolts

0.0

CODE:

This is an Vacuum Cube adapter plate kit that converts a single12x12 inch opening to a single 6x6 inch opening and includes O-rings and screws. This adapter mates to a 12X12 Vacuum Cube frame opening and transforms the 12x12 face to a single 6x6 Vacuum Cube Plate. These blank...

$292²⁷

In stock

+ −

Ideal Vacuum Replacement Viton O-Ring Seal for 28" Stainless Steel and Aluminum Welded Chamber Doors

0.0

These replacement Viton O-ring seals are used on all 28 inch Ideal Vacuum aluminum and stainless welded chambers to seal door. Replacement of the O-ring seal is needed if the O-ring has physical damage or permanent deformation causing poor vacuum performance. These seals are fitted into the...

$251⁷⁸

In stock

+ −

Agilent Varian TwisTorr 305-FS Turbo Pump With Conflat CF 6 Inch Inlet, 255 l/s Pumping Speed, Air Cooled. PN: X3513-64009

0.0

CODE:

Agilent Varian TwisTorr 305-FS Turbomolecular Vacuum Pump With Conflat 6 Inch Inlet, 255 l/s Pumping Speed, Air Cooled. Air Cooling Kit Sold Separately, Agilent Varian Part Number X3513-64009. These Agilent Varian TwisTorr 305 FS turbomolecular vacuum pumps are air cooled, with...

$7,918⁴⁰

In stock

+ −

Agilent Varian MBA-100 Metal Bayard Alpert Ionization Gauge, Iridium Filament, 2.75 in Conflat

0.0

CODE:

Agilent Varian MBA-100 Metal Bayard-Alpert Ionization Gauge Tubes, Iridium Filament, 2.75 inch CFF Conflat Flange, Pressure range: 30 millitorr to 5 × 10-10 torr, Sensitivity: 15 torr-1 typical, Maximum bakeout temperature: 100 °C with cable disconnected. The Agilent Varian MBA-100 is a...

$597⁷¹

In stock

+ −