Newest

0.0
Edwards TAG Turbo and Active Gauge Controller Kit with 200W External 24 VDC Power Supply and AC Power Cord for nEXT Turbo Pumps. This Edwards TAG Turbo and Active Gauge Controller Kit includes the TAG controller, the matching 200W power supply, and a 2 meter long, US plug 5-15P to...
$1,89945
In stock
+
Save 40%
0.0
Edwards nEXT730D Turbo Vacuum Pump with Conflat CF 8.0" DN160 CF Inlet, 820 l/s Pumping Speed, Air or Water Cooled. Edwards Part Number: B8J200400. Edwards nEXT730D turbomolecular high vacuum pumps with a DN160 CF, Conflat CF 8.0 inch inlet flange have a pumping speed of 820...
$12,95340 $21,58900 -40%
In stock
+
0.0
P102891
This Oil Element Replacement fits the Edwards MF100 Oil Mist Filter, part number for MF100 oil mist filter is A223-04-020. This filter is very efficient at 99.999% DOP test. For complete specifications download the instruction manual (see below avaliable downloads). Edwards MF100 MF-100...
$55116
In stock
+
0.0
P102890
The MF 100 Oil Mist Filter removes oil mist (vapor) from the process gases exhausted from the outlet of an oil sealed pump. The filters remove both odor and oil vapor and so prevent it from reaching the atmosphere and the workplace. This filter is very efficient at 99.999% DOP test. For complete...
$2,28821
In stock
+
0.0
P101863
This Stainless Steel Wire Mesh is for NW25 KF25 Foreline Traps on this website. Foreline Trap NW25 KF25 part no. CSL-X(824)-NW25. This Stainless Steel Wire Mesh is corrosive resistant media, with a large surface area. Traps condensable particles & oil vapors.
$16884
In stock
+
Save 40%
0.0
Edwards nEXT730D Turbo Vacuum Pump with ISO-K 160 Inlet, 820 l/s Pumping Speed, Air or Water Cooled. Edwards Part Number: B8J200300. Edwards nEXT7300D turbomolecular high vacuum pumps with an ISO-K 160 inlet flange have a pumping speed of 820 liters per second (l/s) and an...
$12,44535 $20,74225 -40%
In stock
+
Save 2%
0.0
P104833
Conflat, Flange, (CF) Elbow, 90 Degrees, CF 4-5/8 inches Stainless Steel Fittings These 90 degree elbow vacuum fittings have two rotatable 4-5/8 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge...
$39436 $40400 -2%
In stock
+
Save 3%
0.0
P104832
Conflat, Flange, (CFF) Elbow, 90 Degrees, CF 2-1/8 inches Stainless Steel Fittings These 90 degree elbow vacuum fittings have two rotatable 2-1/8 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge...
$13993 $14500 -3%
In stock
+
0.0
P106184
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW50 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-50 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0203R. These HVA brand pneumatically operated series 11000 gate valves are made in...
$2,13483
In stock
+
0.0
P106184
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW50 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-50 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0203R. These HVA brand pneumatically operated series 11000 gate valves are made in the...
$1,90464
In stock
+
0.0
Edwards PRX10 purge restrictor for any nEXT Series Turbo Pump. Edwards Part Number: B58065001 This Edwards purge gas restrictor sets the flow rate of dry purge gas through the purge port on any nEXT turbo pump. An inert purge gas is used to protect the bearing and motor from...
$28587
In stock
+
0.0
Edwards Vent or Purge Port Adapter, G 1/8 in. to KF10 for any nEXT Turbo Pumps. Edwards Part Number: B58066011 This Edwards vent or purge port adapter is used to convert the G 1/8 inch (BSPP) female vent or purge port on any nEXT turbo pump to a KF10 NW10 flange. An...
$13637
In stock
+
0.0
Edwards TAV6 Venting Valve, Unterminated Wire, for any nEXT Turbo Pump, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B58066020. This Edwards TAV6 venting valve can be installed in any nEXT85D, 240D, 300D, 400D, 730D, 930D, or 1230H series turbo pump....
$63510
In stock
+
0.0
P102852
MKS Cable Connects PR4000 Controller to Terminal Block on 223, 622, 623 Baratron® Capacitance Manometers. MKS Part Number: CB112-2-10. This cable is for the MKS Controllers PR4000, 146, 186, 651, 660 and connects to the terminal block on the 223, 622, 623 Baratron® Capacitance...
$9758
Out of stock
0.0
P106183
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW40 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-40 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0153R. These HVA brand pneumatically operated series 11000 gate valves are made in the...
$2,20764
In stock
+
0.0
P106183
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW40 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-40 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0153R. These HVA brand pneumatically operated series 11000 gate valves are made in the...
$2,22069
In stock
+
0.0
P106183
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW40 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-40 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0153R. These HVA brand pneumatically operated series 11000 gate valves are made in the...
$1,99050
In stock
+
Save 5%
0.0
P102179
Conflat, Flange, (CFF) Elbow, 90 Degrees, CF 1-1/3 inches Stainless Steel Fittings These 90 degree elbow vacuum fittings have two rotatable 1-1/3 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge...
$10603 $11200 -5%
In stock
+
Save 1%
0.0
P104847
Conflat, Flange, (CF) Elbow, 45 Degrees, CF 6 inches Stainless Steel Fittings These 45 degree elbow vacuum fittings have two rotatable 6 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to...
$47926 $48500 -1%
In stock
+
0.0
P106184
HVA High Vacuum HV Pneumatic Gate Valve ISO-KF NW50 Flange, Viton Gate and Bonnet Seals, 304 Stainless Steel. KF-50 Quick Flange. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0203R. These HVA brand pneumatically operated series 11000 gate valves are made in...
$2,12178
In stock
+
0.0
P103608
This HEPA Media is for NW25 KF25 Foreline Traps on this website. The foreline trap canister that it fits is NW25 KF25 and our part number is P101861. This is only one HEPA media filter, the foreline trap is sold separately. This HEPA filter includes: Reinforced with epoxy coated steel...
$14029
In stock
+
0.0
P101864
This Activated Carbon Granule Media is for NW25 KF25 Foreline Traps on this website. Foreline Trap NW25 KF25 part no. CSL-X(824)-NW25. This Activated Carbon Granule stops both particulate matter, gas or vapor odors and contaminants.
$18852
In stock
+
0.0
P101865
This Activated Alumina Media is for NW25 KF25 Foreline Traps on this website. Foreline Trap NW25 KF25 part no. CSL-X(824)-NW25. This Activated Alumina media has a long life span and is very effective in preventing backstreaming and in trapping water & acid vapors. (Lewis acids, polar compounds &...
$12920
In stock
+
0.0
P1012903
MKS Mass Flow Controller Cable Connects PR400 Controller to DB15 Mass Flow Meters, 10 ft. (3m) Long. MKS Part Number: RCB147-1-10. The MKS Mass Flow Controller Cable connectsa PR4000 controller to MKS mass flow meters and controllers with 15-pin D-sub connectors. This is the Cable...
$36384
In stock
+
Show another 24 products