Newest - page 16

Edwards EXT 70 Turbo Molecular Pump Rebuild And Repair Kit

0.0

Edwards EXT 70 Turbo Molecular Pump Rebuild and Repair Kit These rebuild and repair kit are for the Edwards EXT 70 turbo molecular vacuum pump series, including the Edwards EXT 70, Edwards EXT 70H and Edwards EXT 70 conflat models. The kit includes dust seals, O-rings, bearings, and...

€763⁹⁰

In stock

+ −

Edwards WCX500 Water Cooling Kit for Edwards EXT70, EXT70H/70Hi, EXT75DX/75iDX Turbo Pumps. PN: B73600121

0.0

Edwards WCX 500 Water Cooler Kit For Edwards EXT Turbo Molecular Vacuum Pumps Edwards Part Number B73600121 These Edwards WCX 500 water cooler kits connect to Edwards EXT EXT70, EXT70H/70Hi, EXT75DX/75iDX, EXT250/250H/250Hi, EXT255DX/255iDX/255H, EXT351/501 Turbo Molecular High Vacuum...

€285²⁷

In stock

+ −

Edwards BX70 240 VAC Flange Heater Bakeout Band for EXT70 Turbo Pumps. PN: B58052060

0.0

Edwards BX70 Bakeout Band for EXT70 Series Turbomolecular pumps, 220-240V 50/60Hz Edwards Part Number B58052060 This Edwards BX70 Bakeout Band fits Fits EXT70 Model Turbo Pumps and will help increase the rate of degassing of the the turbo pump body, resulting in faster pump down time and...

€407⁵³

In stock

+ −

Edwards ACX75 Air Cooling System for EXT75DX Turbo Pumps. PN: B58053075

0.0

Edwards ACX75 ACX Air Cooling System for EXT75DX EXT Turbo Molecular High Vacuum Pumps. BOC Edwards Part Number: B58053075. Edwards ACX75 Air Cooling System for EXT75DX Turbo Molecular High Vacuum Pumps. The air-cooler can be powered by your own external power supply, the Edwards TIC...

€458⁴⁸

In stock

+ −

Teledyne Hastings DV-4D-KF16 Thermocouple Vacuum Gauge Tube, KF16 fitting for 0.01 to 20 Torr Range

0.0

CODE:

Teledyne Hastings DV-4D-KF16 Thermocouple Vacuum Gauge Tube with KF-16 Vacuum Fittings for 0.01 to 20 Torr Range (Stock Number 55-258) Teledyne Hastings DV-4D-KF16 thermocouple vacuum gauge tubes have an extra strong housing and can measure pressure between 0.01 and 20 Torr (10 to 20,000...

€317⁷⁶

In stock

+ −

Save 4%

ISO-K DN 160 Bored Blank Flange, For 6 Inch O.D. (152.4 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel

0.0

CODE:

ISO-K DN 160 Bored Blank Flange, For 6 Inch O.D. (152.4 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel. These ISO-K DN 160 bored blank flanges follow vacuum technology standards as described in DIN 28404 and ISO 1609. ISO-K fittings are quick to assemble using claw...

€100⁸⁰ €105⁴⁷ -4%

In stock

+ −

Save 3%

ISO-K DN 100 Bored Blank Flange, For 4 Inch O.D. (101.6 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel

0.0

CODE:

ISO-K DN 100 Bored Blank Flange, For 4 Inch O.D. (101.6 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel. These ISO-K DN 100 bored blank flanges follow vacuum technology standards as described in DIN 28404 and ISO 1609. ISO-K fittings are quick to assemble using claw...

€82⁶⁴ €85¹⁶ -3%

In stock

+ −

ISO-K DN 80 Bored Blank Flange, For 3 Inch O.D. (76.2 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel

0.0

CODE:

ISO-K DN 80 Bored Blank Flange, For 3 Inch O.D. (76.2 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel. These ISO-K DN 80 bored blank flanges follow vacuum technology standards as described in DIN 28404 and ISO 1609. ISO-K fittings are quick to assemble using claw...

€60¹²

In stock

+ −

Save 4%

ISO-K DN 63 Bored Blank Flange, For 2.5 Inch O.D. (63.5 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel

0.0

CODE:

ISO-K DN 63 Bored Blank Flange, For 2.5 Inch O.D. (63.5 mm) Tubing, Weld-On, Claw Clamp Type Flange, Stainless Steel. These ISO-K DN 63 bored blank flanges follow vacuum technology standards as described in DIN 28404 and ISO 1609. ISO-K fittings are quick to assemble using claw...

€49⁵⁸ €51⁵⁶ -4%

In stock

+ −

Teledyne Hastings DV-4R Ruggedized Thermocouple Vacuum Gauge Tube for 0.01 to 20 Torr Range

0.0

CODE:

Teledyne Hastings DV-4R Ruggedized Thermocouple Vacuum Gauge Tube for 0.01 to 20 Torr Range (Stock Number 55-19R) Teledyne Hastings DV-4R ruggedized thermocouple vacuum gauge tubes have an extra strong housing and can measure pressure between 0.01 and 20 Torr (10 to 20,000 mTorr). Teledyne...

€170⁰⁴

In stock

+ −

Teledyne Hastings DV-4D Thermocouple Vacuum Gauge Tube for 0.01 to 20 Torr Range

0.0

CODE:

Teledyne Hastings DV-4D Ruggedized Thermocouple Vacuum Gauge Tube for 0.01 to 20 Torr Range (Stock Number 55-19) Teledyne Hastings DV-4D thermocouple vacuum gauge tubes have an extra strong housing and can measure pressure between 0.01 and 20 Torr (10 to 20,000 mTorr). Teledyne Hastings...

€144⁸⁴

In stock

+ −

Edwards PRX10 Purge Restrictor for any nEXT Turbo Pump. PN: B58065001

0.0

Edwards PRX10 purge restrictor for any nEXT Series Turbo Pump. Edwards Part Number: B58065001 This Edwards purge gas restrictor sets the flow rate of dry purge gas through the purge port on any nEXT turbo pump. An inert purge gas is used to protect the bearing and motor from...

€223³⁴

In stock

+ −

Edwards Vent or Purge Port Adapter with G 1/8 in. Fitting to KF-10 Flange for any nEXT Turbo Pump. PN: B58066011

0.0

Edwards Vent or Purge Port Adapter, G 1/8 in. to KF10 for any nEXT Turbo Pumps. Edwards Part Number: B58066011 This Edwards vent or purge port adapter is used to convert the G 1/8 inch (BSPP) female vent or purge port on any nEXT turbo pump to a KF10 NW10 flange. An alternative...

€106⁵⁴

In stock

+ −

Edwards TAV5 24 VDC Normally Closed NC Venting Valve with Accessory Connector for nEXT Turbo Pumps with G 1/8 in. Fitting. PN: B8G200835

0.0

Edwards TAV5 Venting Valve, Accessory Connector, for nEXT85D, nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps, 24 VDC, Normally Closed (NC), G 1/8 in. Fitting. Edwards Part Number: B8G200835. This Edwards TAV5 venting valve can be used on the nEXT85D, nEXT730D, nEXT930D, and...

€1,007³¹

In stock

+ −

Edwards TAV5 24 VDC Normally Open NO Venting Valve with Accessory Connector for nEXT Turbo Pumps with G 1/8 in. Fitting. PN: B8G200834

0.0

Edwards TAV5 Venting Valve, Accessory Connector, for nEXT85D, nEXT730D, nEXT930D, and nEXT1230H Turbo Pumps, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B8G200834. This Edwards TAV5 venting valve can be used on the nEXT85D, nEXT730D, nEXT930D, and...

€728⁰⁹

In stock

+ −

Edwards TAV6 24 VDC Normally Open NO Venting Valve with 3m Long Unterminated Wire for any nEXT Turbo Pump with G 1/8 in. Fitting. PN: B58066020

0.0

Edwards TAV6 Venting Valve, Unterminated Wire, for any nEXT Turbo Pump, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B58066020. This Edwards TAV6 venting valve can be installed in any nEXT85D, 240D, 300D, 400D, 730D, 930D, or 1230H series turbo pump....

€496¹⁷

In stock

+ −

Vacuum UltraLock High Vacuum HV Manually Operated Gate Valve ISO-F DN 63 Flange, Ball Groove Locking, Viton Gate & Bonnet Seals, 304 Stainless Steel

0.0

CODE:

Vacuum UltraLock High Vacuum HV Manually Operated Gate Valve ISO-F DN 63 Flange, Ball Groove Locking, Viton Gate & Bonnet Seals, 304 Stainless Steel. ISO-63 Bolt Down Flange with M8 x 1.25 Threads These Ideal Vacuum UltraLock™ manually operated gate valves have an ISO-F DN 63 vacuum...

€2,355⁹⁶

In stock

+ −

Edwards TAV5 24 VDC Normally Open NO Venting Valve with 3m Long Unterminated Wire for any nEXT Turbo Pump with G 1/8 in. Fitting. PN: B58066010

0.0

Edwards TAV5 Venting Valve, Unterminated Wire, for any nEXT Turbo Pump, 24 VDC, Normally Open (NO), G 1/8 in. Fitting. Edwards Part Number: B58066010 This Edwards TAV5 venting valve can be installed in any nEXT85D, 240D, 300D, 400D, 730D, 930D, or 1230H series turbo pump. This...

€631⁸⁴

In stock

+ −

Edwards 1.5m Long Accessory Extension Cable with Unterminated Bare Wire End for nEXT Turbo Pump Accessories. PN: B8G200839

0.0

Edwards Accessory Extension Cable with Bare Wire End for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories, 1.5 m Long. Edwards Part Number: B8G200839. This Edwards accessory extension cable attaches on one end of a nEXT85D, nEXT730D, nEXT930D, or nEXT1230H...

€112⁰⁸

In stock

+ −

Edwards 0.2m Long Male-to-Female Accessory Port Extension Cable for nEXT Turbo Pump Accessories. PN: B8G200836

0.0

Edwards Accessory Extension Cable for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories, 0.2 m Long. Edwards Part Number: B8G200836. This Edwards accessory extension cable attaches to the accessory port, or the accessory Y connector (part number P1012518) on a...

€136⁹⁷

In stock

+ −

Edwards Accessory Y Connector for nEXT Turbo Pump Accessories. PN: B8G200837

0.0

Edwards Accessory Y Connector for nEXT85D, nEXT730D, nEXT930D and nEXT1230H Turbo Pump Accessories. Edwards Part Number: B8G200837. This Edwards Accessory Y Connector attaches to the accessory port on a nEXT85D, nEXT730D, nEXT930D, and nEXT1230H turbo pump and allows two...

€124⁵²

In stock

+ −

Edwards Bearing Tool Kit for nEXT1230H Turbo Pumps. PN: B8M200845

0.0

Edwards Bearing Replacement Tool Kit for nEXT1230H Turbo Pumps. Edwards Part Number: B8M200845. This is an Edwards bearing replacement tool kit for nEXT1230H turbo pumps. This tool kit is required to remove and replace the bearing at the base of the pump (bearing part number...

€1,167⁶¹

In stock

+ −

Edwards Bearing Kit for nEXT1230H Turbo Pumps. PN: B8M200827

0.0

Edwards Bearing Kit for nEXT1230H Turbo Pumps. Edwards Part Number: B8M200827. This is an Edwards bearing kit for nEXT1230H turbo pumps. The bearing can be serviced on-site by any service engineer trained by Edwards. Replacement of the bearing requires the Edwards bearing tool kit...

€1,237⁹²

In stock

+ −

Save 1%

ISO-K DN 160 Blank Flange, Claw Clamp Type Flange, Stainless Steel

0.0

CODE:

ISO-K DN 160 Blank Flange, Claw Clamp Type Flange, Stainless Steel. These ISO-K DN 160 blank flanges follow vacuum technology standards as described in DIN 28404 and ISO 1609. ISO-K fittings are quick to assemble using claw clamps (please see figure - click to enlarge) and can be...

€153⁴⁸ €155⁴⁷ -1%

In stock

+ −